Anritsu MS2840A - :CALCulate:LLINe[1]|2|3|4|5|6:POINt：LEVel:OFFSet <ampl_1>[,<ampl_2>,,,<ampl_n>]

Chapter 2 SCPI Device Message Details
2-224
:CALCulate:LLINe[1]|2|3|4|5|6:POINt
：
LEVel:OFFSet
<ampl_1>[,<ampl_2>,,,<ampl_n>]
Previous Pt Level Offset
Function
This command sets the offset from the current Limit point for making
linear interpolation between Limit Points.
Command
:CALCulate:LLINe[1]|2|3|4|5|6:POINt:LEVel:OFFSet
<amp_1>[,<ampl_2>,,,<ampl_n>]
Parameter
<amp_n>
Offset level
Range –300.00 to 300.00 dB
Resolution 0.01 dB
Unit dB
Suffix code
DB
dB is used when omitted.
Default 0 dB
Example of Use
To set the offset of 3 dB from the current Limit point for making linear
interpolation between Limit Points.
CALC:LLIN:POIN:OFFS 3,3,3,3,3