Chapter 2 SCPI Device Message Details
2-186
:TRACe:ACTive A|B|C|D|E|F
Active Trace
Function
This command selects the trace (active trace) to operate the marker.
Command
:TRACe:ACTive <trace>
Parameter
<trace>
Type of trace to set to active.
A
Trace A (Default)
B
Trace B
C
Trace C
D
Trace D
E
Trace E
F
Trace F
Details
This command is not available during Spectrum Emission Mask
measurement or Spurious Emission measurement.
Example of Use
To set Trade B to active.
TRAC:ACT B
Related command
This command has the same function as the following command.
:CALCulate:MARKer:TRACe
To Next Page
Loading...
