Chapter 2 SCPI Device Message Details
2-492
:CALCulate:CHPower:FILTer[:RRC]:ALPHa?
Channel Power Rolloff Ratio Query
Function
This command queries the rolloff ratio for Channel Power measurement.
Refer to
[:SENSe]:CHPower:FILTer[:RRC]:ALPHa?.
Related command
This command has the same function as the following command.
[:SENSe]:CHPower:FILTer[:RRC]:ALPHa?
:CONFigure:CHPower
Channel Power Configure
Function
This command sets Channel Power measurement to On.
Command
:CONFigure:CHPower
Details
No measurement is performed.
Example of Use
To set Channel Power measurement to On.
CONF:CHP
To Next Page
Loading...
