Anritsu MS2840A - :CALCulate:BPOWer|:TXPower:MARKer[1]|2|3|4|5|6|7|8|9|10:MINimum; [:SENSe]:BPOWer|:TXPower:BANDwidth[:RESolution] <freq>

2.10 Burst Average Power
2-471
2
SCPI Device Message Details
:CALCulate:BPOWer|:TXPower:MARKer[1]|2|3|4|5|6|7|8|9|10:MINimum
Minimum Search
Function
This command searches for the minimum level point of the active trace
and moves the marker point to that point.
Refer to
:CALCulate:MARKer[1]|2|3|4|5|6|7|8|9|10:MINimum
Related Command
This command has the same function as the following command.
:CALCulate:MARKer[1]|2|3|4|5|6|7|8|9|10:MINimum
:CALCulate:ACPower:MARKer[1]|2|3|4|5|6|7|8|9|10:MINimum
:CALCulate:CHPower:MARKer[1]|2|3|4|5|6|7|8|9|10:MINimum
:CALCulate:OBWidth:MARKer[1]|2|3|4|5|6|7|8|9|10:MINimum
[:SENSe]:BPOWer|:TXPower:BANDwidth[:RESolution] <freq>
Resolution Bandwidth
Function
This command sets the resolution bandwidth (RBW).
Refer to
[:SENSe]:BANDwidth|:BWIDth[:RESolution].
Related command
This command has the same function as the following commands.
[:SENSe]:BANDwidth|:BWIDth[:RESolution]
[:SENSe]:ACPower:BANDwidth[:RESolution]
[:SENSe]:CHPower:BANDwidth[:RESolution]
[:SENSe]:OBWidth:BANDwidth[:RESolution]
:CALCulate:BANDwidth|:BWIDth[:RESolution]
:CALCulate:ACPower:BANDwidth[:RESolution]
:CALCulate:CHPower:BANDwidth[:RESolution]
:CALCulate:OBWidth:BANDwidth[:RESolution]
:CALCulate:BPOWer|:TXPower:BANDwidth[:RESolution]