Anritsu MS2840A - [:SENSe]:SWEep:TIME?

2.7 Sweep/Trigger/Gate
2-255
2
SCPI Device Message Details
[:SENSe]:SWEep:TIME?
Sweep Time Query
Function
This command queries the sweep time. Each parameter is specified in
accordance with the already-specified frequency axis or time axis
measurement.
Query
[:SENSe]:SWEep:TIME?
Response
<time>
Parameter
<time>
Sweep time
Range
[MS269xA]
2 ms to 1000 s (in frequency axis measurement)
1 µs to 1000 s (in time axis measurement)
[MS2830A]
1 ms to 1000 s (in frequency axis measurement)
1 µs to 1000 s (in time axis measurement)
[MS2840A]
1 ms to 1000 s (in frequency axis measurement)
1 µs to 1000 s (in time axis measurement)
Suffix code None. S is used when omitted.
Example of Use
To query the sweep time.
SWE:TIME?
> 0.100000
Related command
This command has the same function as the following commands.
[:SENSe]:ACPower:SWEep:TIME?
[:SENSe]:CHPower:SWEep:TIME?
[:SENSe]:OBWidth:SWEep:TIME?
[:SENSe]:BPOWer|:TXPower:SWEep:TIME?