Anritsu MS2840A - [:SENSe]:SEMask:BANDwidth[1]:VIDeo:MODE?

2.13 Spectrum Emission Mask
2-615
2
SCPI Device Message Details
[:SENSe]:SEMask:BANDwidth[1]:VIDeo:MODE?
Spectrum Emission Mask Video Bandwidth Mode Query
Function
This command queries the processing method for the video bandwidth
(VBW) when measuring the reference power for Spectrum Emission
Mask measurement.
Query
[:SENSe]:SEMask:BANDwidth[1]:VIDeo:MODE?
Response
<method>
Parameter
<method>
Processing method for VBW
VID
Normal VBW
POW
Power VBW
Details
This command is fixed to Auto and cannot be set, when Detection is set
to the following:
•
RMS
Example of Use
To set the processing method for the video bandwidth when measuring
the reference power to Power VBW.
SEM:BAND:VID:MODE?
> POW