Anritsu MS2840A - [:SENSe]:BANDwidth|:BWIDth:VIDeo?

2.3 RBW/VBW
2-95
2
SCPI Device Message Details
[:SENSe]:BANDwidth|:BWIDth:VIDeo?
Video Bandwidth Query
Function
This command queries the video bandwidth (VBW). When Couple
Time/Freq. Domain is set to Off, each parameter is specified in
accordance with the already-specified frequency axis or time axis
measurement.
Query
[:SENSe]:BANDwidth|:BWIDth:VIDeo?
Response
<freq>
Parameter
<freq>
Video bandwidth (VBW)
Range/Resolution 1 Hz to 10 MHz (1 to 3 sequences), 5 kHz, OFF
Suffix code None. Value is returned in Hz units.
Details
The automatic setting of the video bandwidth (VBW) is OFF, if the video
bandwidth is changed.
Example of Use
To query VBW.
BAND:VID?
> 3000
Related command
This command has the same function as the following commands.
[:SENSe]:ACPower:BANDwidth:VIDeo?
[:SENSe]:CHPower:BANDwidth:VIDeo?
[:SENSe]:OBWidth:BANDwidth:VIDeo?