Anritsu MS2840A - [:SENSe]:MIXer:SIGNal?

2.21 Setting External Mixer
2-1003
2
SCPI Device Message Details
[:SENSe]:MIXer:SIGNal?
Signal Identifier Query
Function
This command queries the state of signal identifier operation, which
identifies measured signal and image signal when external mixer is used.
Query
[:SENSe]:MIXer:SIGNal?
Response
<status>
Parameter
<status>
Signal ID
1
Selects signal ID.
0
Does not select signal ID.
Details
This function is available when Option 044/045 is installed for MS2830A.
This function is available when Option 044/046 is installed for MS2840A.
Example of Use
To query the state of signal identifier operation, which identifies
measured signal and image signal.
MIX:SIGN?
> 1