Anritsu MS2840A - [:SENSe]:SEMask:SWEep[1]:POINts <integer>

2.13 Spectrum Emission Mask
2-637
2
SCPI Device Message Details
[:SENSe]:SEMask:SWEep[1]:POINts <integer>
Spectrum Emission Mask Trace Point
Function
This command selects the number of frequency display points when
measuring the reference power for Spectrum Emission Mask
measurement.
Command
[:SENSe]:SEMask:SWEep[1]:POINts <integer>
Parameter
<integer>
Number of frequency display points
Range 11 to 10001
Resolution Any of the following values can be selected:
11, 21, 41, 51, 101, 201, 251, 401, 501, 1001,
2001, 5001, 10001, 30001 (MS269xA Only)
Suffix code None
Example of Use
To set the number of frequency display points when measuring the
reference power to 2001.
SEM:SWE:POIN 2001