Anritsu MS2840A - :CALCulate:MATH? <trace>

Chapter 2 SCPI Device Message Details
2-246
:CALCulate:MATH? <trace>
Math Query
Function
This command queries the Math setting of trace.
Query
:CALCulate:MATH? <trace>
Response
<math_type>,<operand1_trace>,<operand2_trace>
Parameter
<trace>
Type of trace
TRACe1
Trace A
TRACe2
Trace B
TRACe3
Trace C
TRACe4
Trace D
TRACe5
Trace E
TRACe6
Trace F
<math_type>
Calculation type
OFF
Disables the Math function (Default)
PDIFference
Operand1 – Operand2 (Power
subtraction)
PSUM
Operand1 + Operand2 (Power
addition)
LDIFference
Operand1 – Operand2 (Log
subtraction)
LSUM
Operand1 + Operand2 (Log
addition)
<operand1_trace>
Type of trace for Operand1
TRACe1
Trace A
TRACe2
Trace B
TRACe3
Trace C
TRACe4
Trace D
TRACe5
Trace E
TRACe6
Trace F
<operand2_trace>
Type of trace for Operand2
TRACe1
Trace A
TRACe2
Trace B
TRACe3
Trace C
TRACe4
Trace D
TRACe5
Trace E
TRACe6
Trace F
Details
This command is available only for MS2830A.
Example of Use
To query the Math setting of Trace A.
CALC:MATH? TRAC1
> PDIF,TRAC3,TRAC5