2
SCPI Device Message Details
• When the Measure function is On
• When Signal identifier is On
• When the Normalize function is On
• When Gate View is On
When Scale Mode is Linear, calculation type is not set to the Log
caluculation (LDIFference, LSUM).
This cannot set Trace type for Operand1 and Operamd2 to active.
Example of Use
To subtract the Trace E power from the Trace C power and to display the
result in Trace A.
CALC:MATH TRAC1,PDIF,TRAC3,TRAC5
To Next Page
Loading...
