Chapter 2 SCPI Device Message Details
2-188
:TRACe[1]|2|3|4|5|6:TYPE WRITe|VIEW|BLANk
Trace Write Mode
Function
This command sets the trace-writing mode.
Command
:TRACe[n]:TYPE <mode>
Parameter
<n>
Target trace
1
Trace A
2
Trace B
3
Trace C
4
Trace D
5
Trace E
6
Trace F
When omitted: Trace A
<mode>
Trace-writing mode
WRITe
Updates the display per measurement (Write
mode)
VIEW
Does not update the display per measurement
(View mode)
BLANk
Does not display (Blank mode)
Details
This command is not available in the following cases:
•
During the Spurious Emission measurement
•
During the Spectrum Emission Mask measurement
Example of Use
To update the display of the active trace every time the measurement is
performed.
TRAC:TYPE WRIT
To Next Page
Loading...
