Anritsu MS2840A - [:SENSe]:BPOWer|:TXPower:AVERage:COUNt <integer>; [:SENSe]:BPOWer|:TXPower:AVERage:COUNt?

2.10 Burst Average Power
2-463
2
SCPI Device Message Details
[:SENSe]:BPOWer|:TXPower:AVERage:COUNt <integer>
Average Count
Function
This command sets the storage count.
Refer to
[:SENSe]:AVERage:COUNt.
Command
This command has the same function as the following commands.
[:SENSe]:AVERage:COUNt
[:SENSe]:ACPower:AVERage:COUNt
[:SENSe]:CHPower:AVERage:COUNt
[:SENSe]:OBWidth:AVERage:COUNt
[:SENSe]:SEMask:AVERage:COUNt
[:SENSe]:BPOWer|:TXPower:AVERage:COUNt?
Average Count Query
Function
This command queries the storage count.
Refer to
[:SENSe]:AVERage:COUNt?.
Command
This command has the same function as the following commands.
[:SENSe]:AVERage:COUNt?
[:SENSe]:ACPower:AVERage:COUNt?
[:SENSe]:CHPower:AVERage:COUNt?
[:SENSe]:OBWidth:AVERage:COUNt?
[:SENSe]:SEMask:AVERage:COUNt?