Anritsu MS2840A - :CALCulate:NTData[:STATe]?; :TRACe:COPY <source_trace>,<dest_trace>

2.6 Trace
2-241
2
SCPI Device Message Details
:CALCulate:NTData[:STATe]?
Normalize Query
Function
This command queries the On/Off state of the Normalize function.
Query
:CALCulate:NTData[:STATe]?
Response
<switch>
Parameter
<switch>
Normalize function On/Off
ON|1
Normalize function is On.
OFF|0
Normalize function is Off.
Details
This command is available only for MS2830A.
Example of Use
To query the On/Off state of the Normalize function.
CALC:NTD?
> 1
:TRACe:COPY <source_trace>,<dest_trace>
Store Ref.
Function
This command copies the target trace to selected trace as Store Ref..
Command
:TRACe:COPY <source_trace>,<dest_trace>
Parameter
<source_trace>
Source Trace type
TRACe1
Trace A
TRACe2
Trace B
TRACe3
Trace C
TRACe4
Trace D
TRACe5
Trace E
TRACe6
Trace F
<dest_trace>
Destination Trace Type
TRACe1
Trace A
TRACe2
Trace B
TRACe3
Trace C
TRACe4
Trace D
TRACe5
Trace E
TRACe6
Trace F
Details