Anritsu MS2840A - [:SENSe]:SEMask:OFFSet[1]:LIST:BANDwidth[1][:RESolution]:AUTO?

2.13 Spectrum Emission Mask
2-605
2
SCPI Device Message Details
[:SENSe]:SEMask:OFFSet[1]:LIST:BANDwidth[1][:RESolution]:AUTO?
Spectrum Emission Mask Offset Resolution Bandwidth Auto/Manual Query
Function
This command queries the On/Off state of the automatic resolution
bandwidth (RBW) setting function when measuring the offset for
Spectrum Emission Mask measurement automatically.
Query
[:SENSe]:SEMask:OFFSet[1]:LIST:BANDwidth[1][:RESolution]
:AUTO?
Response
<switch_n>
Parameter
<switch_n>
Automatic resolution bandwidth setting function
when measuring Offset-n
1
Enables the automatic resolution bandwidth
setting function.
0
Disables the automatic resolution bandwidth
setting function.
Details
The setting range of this function is limited depending on the settings of
other parameters. Refer to the
MS2690A/MS2691A/MS2692A Signal
Analyzer Operation Manual (Spectrum Analyzer Function Operation)
or
MS2830A/MS2840A Signal Analyzer Operation Manual (Spectrum
Analyzer Function Operation)
for details.
Example of Use
To query the automatic resolution bandwidth setting function On/Off
state for the offset.
SEM:OFFS:LIST:BAND:AUTO?
> 1,1,1,1,1,1,1,1,1,1,1,1