Anritsu MS2840A - SPUR:BAND:VID:AUTO;SPUR:BAND:VID:AUTO?

Chapter
４
Native Device Message Details
4-283
4
Native Device Message Details
SPUR:BAND:VID:AUTO/SPUR:BAND:VID:AUTO?
Spurious Emission Video Bandwidth Auto/Manual
Function
This command sets the video bandwidth (VBW) of each segment to
Auto/Manual.
Command
SPUR:BAND:VID:AUTO
switch_1_com,switch_2_com,switch_3_com,switch_4_com,swit
ch_5_com,switch_6_com,switch_7_com,switch_8_com,switch_9
_com,switch_10_com,switch_11_com,switch_12_com,switch_13
_com,switch_14_com,switch_15_com,switch_16_com,switch_17
_com,switch_18_com,switch_19_com,switch_20_com
Query
SPUR:BAND:VID:AUTO?
Response
switch_1_res,switch_2_res,switch_3_res,switch_4_res,swit
ch_5_res,switch_6_res,switch_7_res,switch_8_res,switch_9
_res,switch_10_res,switch_11_res,switch_12_res,switch_13
_res,switch_14_res,switch_15_res,switch_16_res,switch_17
_res,switch_18_res,switch_19_res,switch_20_res
Parameter
switch_n_com
Auto mode On/Off
ON|1
Auto mode is set to On.
OFF|0
Auto mode is set to Off.
switch_n_res
Auto mode On/Off
1
Auto mode is set to On.
0
Auto mode is set to Off.
Example of Use
To set the resolution bandwidth of the offset to Auto.
SPUR:BAND:VID:AUTO
ON,ON,ON,ON,ON,ON,OFF,OFF,ON,ON,ON,ON,ON,ON,OFF,OFF,ON,O
N,ON,ON
SPUR:BAND:VID:AUTO?
> 1,1,1,1,1,1,0,0,1,1,1,1,1,1,0,0,1,1,1,1