Anritsu MS2840A - [:SENSe]:SEMask:OFFSet[1]:LIST:SWEep[1]:TIME:AUTO:MODE?

2.13 Spectrum Emission Mask
2-629
2
SCPI Device Message Details
[:SENSe]:SEMask:OFFSet[1]:LIST:SWEep[1]:TIME:AUTO:MODE?
Spectrum Emission Mask Offset Auto Sweep Time Select Query
Function
This command queries the sweep mode (Normal/Fast) when the
automatic sweep time setting function is enabled for the offset during
Spectrum Emission Mask measurement.
Query
[:SENSe]:SEMask:OFFSet[1]:LIST:SWEep[1]:TIME:AUTO:MODE?
Response
<mode_n>
Parameter
<mode_n>
Normal/Fast of sweep time of Offset-n
NORM
Normal sweep mode
FAST
High-speed sweep mode
Example of Use
To query the sweep mode when the automatic sweep time setting
function is enabled for the offset.
SEM:OFFS:LIST:SWE:TIME:AUTO:MODE?
>
NORM,NORM,NORM,NORM,NORM,NORM,NORM,NORM,NORM,NORM,NORM,N
ORM