Anritsu MS2840A - :CALCulate:SPURious[:RANGe][:LIST]:LIMit:ABSolute[:UPPer]:DATA[:STARt] <ampl_1>,<ampl_2>,<ampl_3>,<ampl_4>,<ampl_5>,<ampl_6>,<ampl_7>,<ampl_8>,<ampl_9>,<ampl_10>,<ampl_11>,<ampl_12>,<ampl_13>,<ampl_14>,<ampl_15>,<ampl_16>,<ampl_17>,<ampl_18>,<ampl_19...

Chapter 2 SCPI Device Message Detail
2-772
:CALCulate:SPURious[:RANGe][:LIST]:LIMit:ABSolute[:UPPer]:DATA[:STARt]
<ampl_1>,<ampl_2>,<ampl_3>,<ampl_4>,<ampl_5>,<ampl_6>,<ampl_7>,<a
mpl_8>,<ampl_9>,<ampl_10>,<ampl_11>,<ampl_12>,<ampl_13>,<ampl_14>
,<ampl_15>,<ampl_16>,<ampl_17>,<ampl_18>,<ampl_19>,<ampl_20>
Spurious Emission Limit Start Level
Function
This command sets the absolute level limit of the start frequency in each
segment for the Spurious Emission measurement.
Command
:CALCulate:SPURious[:RANGe][:LIST]:LIMit:ABSolute[:UPPer
]:DATA[:STARt] <ampl_n>
Parameter
<ampl_n>
Absolute level limit of start Frequency of
Segment n
Range –200 dBm to 50 dBm
Resolution 0.01 dB
Suffix Code DBM,DM
Default –13 dBm
Example of Use
To set the absolute level limit of the start frequency in each segment.
CALC:SPUR:LIM:ABS:DATA
−13DBM,−13DBM,−13DBM,−13DBM,−13DBM,−13DBM,-10DBM,-10DBM,
−13DBM,−13DBM,−13DBM,−13DBM,−13DBM,−13DBM,-10DBM,-10DBM,
−13DBM,−13DBM,−13DBM,−13DBM