Anritsu MS2840A - CALC:SPUR:LIM:ABS:DATA;CALC:SPUR:LIM:ABS:DATA?

Chapter
４
Native Device Message Details
4-60
CALC:SPUR:LIM:ABS:DATA/CALC:SPUR:LIM:ABS:DATA?
Spurious Emission Limit Start Level
Function
This command sets the absolute level limit of the start frequency in each
segment for the Spurious Emission measurement.
Command
CALC:SPUR:LIM:ABS:DATA
ampl_1,ampl_2,ampl_3,ampl_4,ampl_5,ampl_6,ampl_7,ampl_8,
ampl_9,ampl_10,ampl_11,ampl_12,ampl_13,ampl_14,ampl_15,a
mpl_16,ampl_17,ampl_18,ampl_19,ampl_20
Query
CALC:SPUR:LIM:ABS:DATA?
Response
ampl_1,ampl_2,ampl_3,ampl_4,ampl_5,ampl_6,ampl_7,ampl_8,
ampl_9,ampl_10,ampl_11,ampl_12,ampl_13,ampl_14,ampl_15,a
mpl_16,ampl_17,ampl_18,ampl_19,ampl_20
Value is returned in dBm units, without suffix code.
Parameter
ampl_n
Absolute level limit of start frequency of
Segment n
Range –200 dBm to 50 dBm
Resolution 0.01 dB
Suffix code DBM,DM
Example of Use
To set the absolute level limit of the start frequency of each segment.
CALC:SPUR:LIM:ABS:DATA
-13DBM,-13DBM,-13DBM,-13DBM,-13DBM,-13DBM,-10DBM,-10DBM,
-13DBM,-13DBM,-13DBM,-13DBM,-13DBM,-13DBM,-10DBM,-10DBM,
-13DBM,-13DBM,-13DBM,-13DBM
CALC:SPUR:LIM:ABS:DATA?
>
-13.00,-13.00,-13.00,-13.00,-13.00,-13.00,-10.00,-10.00,
-13.00,-13.00,-13.00,-13.00,-13.00,-13.00,-10.00,-10.00,
-13.00,-13.00,-13.00,-13.00