Anritsu MS2840A - SPUR:TDOM:SWE:TIME;SPUR:TDOM:SWE:TIME?

Chapter
４
Native Device Message Details
4-308
SPUR:TDOM:SWE:TIME/SPUR:TDOM:SWE:TIME?
Spurious Emission Time Domain Sweep Time
Function
This command sets the sweep time when performing Time Domain
measurement.
Command
SPUR:TDOM:SWE:TIME
seconds_1,seconds_2,seconds_3,seconds_4,seconds_5,second
s_6,seconds_7,seconds_8,seconds_9,seconds_10,seconds_11,
seconds_12,seconds_13,seconds_14,seconds_15,seconds_16,s
econds_17,seconds_18,seconds_19,seconds_20
Query
SPUR:TDOM:SWE:TIME?
Response
seconds_1,seconds_2,seconds_3,seconds_4,seconds_5,second
s_6,seconds_7,seconds_8,seconds_9,seconds_10,seconds_11,
seconds_12,seconds_13,seconds_14,seconds_15,seconds_16,s
econds_17,seconds_18,seconds_19,seconds_20
Value is returned in s units, without suffix code.
Parameter
seconds_n
Sweep time of Segment n
Range 1
µ
s to 1000 s (For Time-axis measurement)
Suffix code NS,US,MS,S
S is used when omitted.
Default Auto value
Example of Use
To set the sweep time when performing Time Domain measurement.
SPUR:TDOM:SWE:TIME
0.1,0.1,0.1,0.1,0.1,0.1,0.1,0.1,0.1,0.1,0.2,0.3,0.1,0.1,
0.1,0.1,0.1,0.1,0.1,0.1
SPUR:TDOM:SWE:TIME?
>
0.100000,0.100000,0.100000,0.100000,0.100000,0.100000,0.
100000,0.100000,0.100000,0.100000,0.200000,0.300000,0.10
0000,0.100000,0.100000,0.100000,0.100000,0.100000,0.1000
00,0.100000