Anritsu MS2840A - SPUR:TYPE;SPUR:TYPE?

Chapter
４
Native Device Message Details
4-309
4
Native Device Message Details
SPUR:TYPE/SPUR:TYPE?
Spurious Emission Result Type
Function
This command selects the measurement result type.
Command
SPUR:TYPE type_com
Query
SPUR:TYPE?
Response
type_res
Parameter
type_com
Measurement result type
WORS
Point with the least margin from the limit line is
displayed.
EXAM
Same as above
PEAK
Spurious detected by the detection resolution
and the threshold set in each segment is
displayed.
FULL
Same as above
type_res
Measurement result type
WORS
Point with the least margin from the limit line
PEAK
Spurious detected by the detection resolution
and the threshold set in each segment is
displayed.
Details
This command is not available when performing Time Domain
measurement.
Example of Use
To display the point with the least margin from the limit line.
SPUR:TYPE EXAM
SPUR:TYPE?
> WORS