Anritsu MS2840A - CHPWRCENTER;CHPWRCENTER?

Chapter
４
Native Device Message Details
4-63
4
Native Device Message Details
Example of Use
To set the absolute level limit of the stop frequency in each segment to
Auto/Manual.
CALC:SPUR:LIM:ABS:DATA:STOP:AUTO
ON,ON,ON,ON,OFF,OFF,OFF,ON,ON,ON,ON,ON,ON,ON,ON,ON,ON,ON
,ON,ON
CALC:SPUR:LIM:ABS:DATA:STOP:AUTO?
> 1,1,1,1,0,0,0,1,1,1,1,1,1,1,1,1,1,1,1,1
CHPWRCENTER/CHPWRCENTER?
Channel Power Channel Center Frequency
Function
This command sets the center frequency for Channel Power
measurement.
Command
CHPWRCENTER freq
Query
CHPWRCENTER?
Response
freq
Returns a value in Hz units, without a suffix code.
Parameter
freq
Channel center frequency
Range (Start Frequency) to (Stop Frequency)
Resolution 1 Hz
Suffix Code HZ,KHZ,KZ,MHZ,MZ,GHZ,GZ
Hz is used when omitted.
Example of Use
To set the channel power center frequency to 6.01 GHz.
CHPWRCENTER 6.01GHZ