Anritsu MS2840A - MKRL

Chapter
４
Native Device Message Details
4-169
4
Native Device Message Details
Example of Use
To set the active marker mode to delta.
MKR 1
MKR?
> 1
MKRL
Marker to Reference Level
Function
This command sets the marker level to the reference level.
Command
MKRL
Details
This command is not available in the following cases:
•
When the marker mode is set to Off.
•
During the Spurious Emission measurement and when the Displayed
Segment Mode is set to Auto.
•
During the Spectrum Emission Mask measurement.
Example of Use
To set the marker level to the reference level.
MKRL