Anritsu MS2840A - :READ:ACP[n]?; :MEASure:ACP[n]?; :CALCulate:ACPower:MARKer:AOFF

2.9 ACP
2-415
2
SCPI Device Message Details
:READ:ACP[n]?
Adjacent Channel Power Read
Function
This command performs the Adjacent Channel Power measurement and
outputs the measurement result.
It achieves the same result as when commands are sent in the order of
:INITiate:ACP
:*WAI
:FETCh:ACP[n]?
:MEASure:ACP[n]?
Adjacent Channel Power Measure
Function
This command performs the measurement of Adjacent Channel Power
measurement and outputs the measurement result.
It achieves the same result as when commands are sent in the order of
:CONFigure:ACP
:INITiate:ACP
:*WAI
:FETCh:ACP[n]?
:CALCulate:ACPower:MARKer:AOFF
All Marker Off
Function
This command sets all the markers to Off.
Refer to
:CALCulate:MARKer:AOFF.
Related command
This command has the same function as the following commands.
:CALCulate:MARKer:AOFF
:CALCulate:ACPower:MARKer:AOFF
:CALCulate:BPOWer|:TXPower:MARKer:AOFF