Anritsu MS2840A - :DISPlay:SPURious:SEGMent:MODE?; :DISPlay:SPURious:SEGMent <integer>

2.14 Spurious Emission Measurement Function
2-723
2
SCPI Device Message Details
:DISPlay:SPURious:SEGMent:MODE?
Displayed Segment Mode Query
Function
This command queries the display mode of a segment.
Query
:DISPlay:SPURious:SEGMent:MODE?
Response
<switch>
Parameter
<switch>
Display mode
1
Auto
0
Manual
Example of Use
To query the display mode of a segment.
DISP:SPUR:SEGM:MODE?
> 1
:DISPlay:SPURious:SEGMent <integer>
Displayed Segment
Function
This command specifies the segment to display the trace data in.
Command
:DISPlay:SPURious:SEGMent <integer>
Parameter
<integer>
Segment
Range 1 to 20
Resolution 1
Details
A segment which is set to Off cannot be selected.
This command is not available during measurement and when the
displayed segment mode is set to Auto.