Anritsu MS2840A - [:SENSe]:SWEep:EGATe:VIEW:BANDwidth[:RESolution]:AUTO?

Chapter 2 SCPI Device Message Details
2-304
[:SENSe]:SWEep:EGATe:VIEW:BANDwidth[:RESolution]:AUTO?
Gate View Resolution Bandwidth Auto/Manual Query
Function
This command queries the automatic resolution bandwidth (RBW)
setting for Gate View.
This parameter and the one for automatically setting the RBW for time
axis measurement reference the same value.
Query
[:SENSe]:SWEep:EGATe:VIEW:BANDwidth[:RESolution]:AUTO?
Response
<switch>
Parameter
<switch>
Automatic setting
0
Disables the automatic setting.
1
Enables the automatic setting.
Example of Use
To query the automatic resolution bandwidth setting for Gate View.
SWE:EGAT:VIEW:BAND:AUTO?
> 1