Anritsu MS2840A - [:SENSe]:TOI[:STATe] ON|OFF|1|0; :CALCulate:TOI[:STATe] ON|OFF|1|0

2.15 Setting the TOI Measurement Functions
2-823
2
SCPI Device Message Details
[:SENSe]:TOI[:STATe] ON|OFF|1|0
Measure TOI
Function
This command executes the TOI measurement.
Command
[:SENSe]:TOI[:STATe] <switch>
Parameter
<switch>
Turns on and off the TOI measurement.
ON|1
Turns on the TOI measurement.
OFF|0
Turns off the TOI measurement. (Default)
Example of use
To turn on the TOI measurement.
TOI ON
Related Command
This command has the same function as the following command.
:CALCulate:TOI[:STATe] <switch>
:CALCulate:TOI[:STATe] ON|OFF|1|0
Measure TOI
Function
This command executes the TOI measurement.
Refer to
[:SENSe]:TOI[:STATe] <switch>.
Related Command
This command has the same function as the following command.
[:SENSe]:TOI[:STATe] <switch>