Anritsu MS2840A - :CALCulate:MARKer:COUPle:ZONE[:STATe]?

2.4 Marker
2-125
2
SCPI Device Message Details
:CALCulate:MARKer:COUPle:ZONE[:STATe]?
Couple Zone Query
Function
This command queries the On/Off state of the Zone Width shared setting.
Query
:CALCulate:MARKer:COUPle:ZONE[:STATe]?
Response
<switch>
Parameter
<switch>
Zone Width shared setting On/Off
1
On
0
Off
Details
Shares the Zone Width setting of each marker when set to On.
Example of Use
To query the On/Off state of the Zone Width shared setting.
CALC:MARK:COUP:ZONE?
> 1