Chapter
４
Native Device Message Details
4-335
4
Native Device Message Details
SWE:RUL:RTYP?
Sweep Type Select Rules Real Type Query
Function
This command queries the sweep mode (sweep or FFT) that is executed
during measurement.
Query
SWE:RUL:RTYP?
Response
type
Parameter
type
Sweep mode
SWE
Performs measurement using sweep.
FFT
Performs measurement using FFT.
Details
This command is not available for MS269x Series.
Example of Use
To query the sweep type used for measurement under the current
setting.
SWE:RUL:RTYP?
> FFT
To Next Page
Loading...
