Anritsu MS2840A - :CALCulate:ACPower:CARRier[1]:LIST:BANDwidth[:INTegration] <freq>

Chapter 2 SCPI Device Message Details
2-366
Example of Use
To set the inband channel bandwidth to 3.84 MHz.
ACP:CARR:BAND 3.84MHZ
Related command
This command has the same function as the following command.
:CALCulate:ACPower:CARRier[1]:LIST:BANDwidth[:INTegratio
n]
:CALCulate:ACPower:CARRier[1]:LIST:BANDwidth[:INTegration] <freq>
Adjacent Channel Power Carrier Bandwidth
Function
This command sets the measurement bandwidth of the carrier for
Adjacent Channel Power measurement.
Refer to
[:SENSe]:ACPower:CARRier[1]:LIST:BANDwidth[:INTegration]
.
Related command
This command has the same function as the following command.
[:SENSe]:ACPower:CARRier[1]:LIST:BANDwidth[:INTegration]