Anritsu MS2840A - [:SENSe]:BANDwidth|:BWIDth:VIDeo:AUTO?

2.3 RBW/VBW
2-97
2
SCPI Device Message Details
[:SENSe]:BANDwidth|:BWIDth:VIDeo:AUTO?
Video Bandwidth Auto/Manual Query
Function
This command queries the On/Off state of the automatic video bandwidth
(VBW) setting. When Couple Time/Freq. Domain is set to Off, each
parameter is specified in accordance with the already-specified frequency
axis or time axis measurement.
Query
[:SENSe]:BANDwidth|:BWIDth:VIDeo:AUTO?
Response
<switch>
Parameter
<switch>
Automatic video bandwidth setting function
On/Off
0
Automatic video bandwidth setting function is
disabled.
1
Automatic video bandwidth setting function is
enabled.
Example of Use
To query the On/Off state of the automatic video bandwidth setting.
BAND:VID:AUTO?
> 1
Related command
This command has the same function as the following commands.
[:SENSe]:ACPower:BANDwidth:VIDeo?
[:SENSe]:CHPower:BANDwidth:VIDeo?
[:SENSe]:OBWidth:BANDwidth:VIDeo?