Anritsu MS2840A - 3.10.7 Spurious Emission Measurement function settings

3.10 Measure Function Settings
3-45
Native Device Message List
3
Native Device Message List
3
3.10.7 Spurious Emission Measurement function settings
Table 3.10.7-1 lists device messages for setting the Spurious Emission measurement functions.
Table 3.10.7-1 Spurious Emission Measurement function setting messages
Function Command Query Response Remarks
Measure Spurious Emission
SPUR switch_com SPUR? switch_res
switch_com :
= ON|OFF|1|0
Spurious Emission Result Type
SPUR:TYPE type_com SPUR:TYPE? type_res
type_com : Measurement result
type
= WORS|EXAM|PEAK|FULL
Displayed Segment Mode
DISP:SPUR:SEGM:MODE
switch_com
DISP:SPUR:SEGM:MODE? switch_res
switch_com :
= ON|OFF|1|0
Displayed Segment
DISP:SPUR:SEGM
integer
DISP:SPUR:SEGM? integer
Page of Summary Auto/Manual
DISP:SPUR:SEGM:AUTO
switch_com
DISP:SPUR:SEGM:AUTO? switch_res
switch_com :
= ON|OFF|1|0
Displayed Summary Table
Range/Result
DISP:SPUR:STAB
mode_com
DISP:SPUR:STAB? mode_res
mode_com :
= RANG|RES
Next Page
DISP:SPUR:SEGM:NEXT --- ---
Previous Page
DISP:SPUR:SEGM:PREV --- ---