Anritsu MS2840A - SEM:OFFS:LIST:SWE:TIME;SEM:OFFS:LIST:SWE:TIME?

Chapter
４
Native Device Message Details
4-247
4
Native Device Message Details
SEM:OFFS:LIST:SWE:TIME/SEM:OFFS:LIST:SWE:TIME?
Spectrum Emission Mask Offset Sweep Time
Function
This command sets the sweep time of the offset for Spectrum Emission
Mask measurement.
Command
SEM:OFFS:LIST:SWE:TIME
time_1[,time_2[,time_3[,time_4[,time_5[,time_6[,time_7[,
time_8[,time_9[,time_10[,time_11[,time_12]]]]]]]]]]]
Query
SEM:OFFS:LIST:SWE:TIME?
Response
time_1,time_2,time_3,time_4,time_5,time_6,time_7,time_8,
time_9,time_10,time_11,time_12
Returns a value of s units, without a suffix code.
Parameter
time_n
Sweep time of Offset-n
Range
[MS269xA]
2 ms to 1000 s
[MS2830A]
1 ms to 1000 s
[MS2840A]
1 ms to 1000 s
Resolution 1 ms (time_n ≤ 1 s)
0.1 s (1 s < time_n < 10 s)
1 s (10 s ≤ time_n)
Suffix code NS,US,MS,S
S is used when omitted.
Details
The setting range of this function is limited depending on the settings of
other parameters. Refer to
MS2690A/MS2691A/MS2692A Signal
Analyzer Operation Manual (Spectrum Analyzer Function Operation)
or
MS2830A/MS2840A Signal Analyzer Operation Manual (Spectrum
Analyzer Function Operation)
for details.