Anritsu MS2840A - [:SENSe]:SPURious[:RANGe][:LIST]:BANDwidth:VIDeo:AUTO ON|OFF|1|0,ON|OFF|1|0,ON|OFF|1|0,ON|OFF|1|0,ON|OFF|1|0, ON|OFF|1|0,ON|OFF|1|0,ON|OFF|1|0,ON|OFF|1|0,ON|OFF|1|0, ON|OFF|1|0,ON|OFF|1|0,ON|OFF|1|0,ON|OFF|1|0,ON|OFF|1|0, ON|OFF|1|0,ON|OFF|1|0,ON|OFF...

2.14 Spurious Emission Measurement Function
2-751
2
SCPI Device Message Details
[:SENSe]:SPURious[:RANGe][:LIST]:BANDwidth:VIDeo:AUTO
ON|OFF|1|0,ON|OFF|1|0,ON|OFF|1|0,ON|OFF|1|0,ON|OFF|1|0,
ON|OFF|1|0,ON|OFF|1|0,ON|OFF|1|0,ON|OFF|1|0,ON|OFF|1|0,
ON|OFF|1|0,ON|OFF|1|0,ON|OFF|1|0,ON|OFF|1|0,ON|OFF|1|0,
ON|OFF|1|0,ON|OFF|1|0,ON|OFF|1|0,ON|OFF|1|0,ON|OFF|1|0
Spurious Emission Video Bandwidth Auto/Manual
Function
This command sets the video bandwidth (VBW) of each segment to
Auto/Manual.
Command
[:SENSe]:SPURious[:RANGe][:LIST]:BANDwidth:VIDeo:AUTO
<switch_n>
Parameter
<switch_n>
Auto mode of VBW in segment n On/Off
ON|1
Sets Auto mode to On.
OFF|0
Sets Auto mode to Off.
Example of Use
To set the resolution bandwidth of the offset to Auto.
SPUR:BAND:VID:AUTO
ON,ON,ON,ON,ON,ON,OFF,OFF,ON,ON,ON,ON,ON,ON,OFF,OFF,ON,O
N,ON,ON