Anritsu MS2840A - :CALCulate:SPURious:MARKer[1]|2|3|4|5|6|7|8|9|10:X:POSition <integer>; :CALCulate:SPURious:MARKer[1]|2|3|4|5|6|7|8|9|10:X:POSition?

2.14 Spurious Emission Measurement Function
2-807
2
SCPI Device Message Details
:CALCulate:SPURious:MARKer[1]|2|3|4|5|6|7|8|9|10:X:POSition <integer>
Spurious Emission Zone Marker Position
Function
This command moves the center of the zone marker to the specified
position.
Refer to
:CALCulate:MARKer[1]|2|3|4|5|6|7|8|9|10:X:POSition.
Related Command
This command has the same function as the following commands.
:CALCulate:MARKer[1]|2|3|4|5|6|7|8|9|10:X:POSition
:CALCulate:ACPower:MARKer[1]|2|3|4|5|6|7|8|9|10:X:POSiti
on
:CALCulate:CHPower:MARKer[1]|2|3|4|5|6|7|8|9|10:X:POSiti
on
:CALCulate:OBWidth:MARKer[1]|2|3|4|5|6|7|8|9|10:X:POSiti
on
:CALCulate:BPOWer|:TXPower:MARKer[1]|2|3|4|5|6|7|8|9|10:
X:POSition
:CALCulate:SPURious:MARKer[1]|2|3|4|5|6|7|8|9|10:X:POSition?
Spurious Emission Zone Marker Position Query
Function
This command queries the center point of the zone marker.
Refer to
:CALCulate:MARKer[1]|2|3|4|5|6|7|8|9|10:X:POSition?.
Related Command
This command has the same function as the following commands.
:CALCulate:MARKer[1]|2|3|4|5|6|7|8|9|10:X:POSition?
:CALCulate:ACPower:MARKer[1]|2|3|4|5|6|7|8|9|10:X:POSiti
on?
:CALCulate:CHPower:MARKer[1]|2|3|4|5|6|7|8|9|10:X:POSiti
on?
:CALCulate:OBWidth:MARKer[1]|2|3|4|5|6|7|8|9|10:X:POSiti
on?
:CALCulate:BPOWer|:TXPower:MARKer[1]|2|3|4|5|6|7|8|9|10:
X:POSition?