2
SCPI Device Message Details
Related command
This command has the same function as the following command.
:CALCulate:OBWidth[:STATe]?
:CALCulate:OBWidth[:STATe] ON|OFF|1|0
Measure Occupied Bandwidth
Function
This command executes Occupied Bandwidth measurement.
Refer to
[:SENSe]:OBWidth[:STATe].
Related command
This command has the same function as the following command.
[:SENSe]:OBWidth[:STATe] ON|OFF|1|0
:CALCulate:OBWidth[:STATe]?
Measure Occupied Bandwidth Query
Function
This command queries the setting of Occupied Bandwidth measurement.
Refer to
[:SENSe]:OBWidth[:STATe]?.
Related command
This command has the same function as the following command.
[:SENSe]:OBWidth[:STATe]?
To Next Page
Loading...
