Anritsu MS2840A - :CALCulate:SPURious:MARKer[1]|2|3|4|5|6|7|8|9|10:Y?; :CALCulate:SPURious:MARKer:AOFF

Chapter 2 SCPI Device Message Detail
2-808
:CALCulate:SPURious:MARKer[1]|2|3|4|5|6|7|8|9|10:Y?
Spurious Emission Marker Level Query
Function
This command queries the level of the marker point.
Refer to
:CALCulate:MARKer[1]|2|3|4|5|6|7|8|9|10[:PEAK]:Y?.
Related Command
This command has the same function as the following commands.
:CALCulate:MARKer[1]|2|3|4|5|6|7|8|9|10[:PEAK]:Y?
:CALCulate:ACPower:MARKer[1]|2|3|4|5|6|7|8|9|10:Y?
:CALCulate:CHPower:MARKer[1]|2|3|4|5|6|7|8|9|10:Y?
:CALCulate:OBWidth:MARKer[1]|2|3|4|5|6|7|8|9|10:Y?
:CALCulate:BPOWer|:TXPower:MARKer[1]|2|3|4|5|6|7|8|9|10:
Y?
:CALCulate:SPURious:MARKer:AOFF
Spurious Emission All Marker Off
Function
This command sets all the markers to Off.
Refer to
:CALCulate:MARKer:AOFF.
Related Command
This command has the same function as the following commands.
:CALCulate:MARKer:AOFF
:CALCulate:ACPower:MARKer:AOFF
:CALCulate:CHPower:MARKer:AOFF
:CALCulate:BPOWer|:TXPower:MARKer:AOFF