Anritsu MS2840A - SWE:EGAT:VIEW;SWE:EGAT:VIEW?

Chapter
４
Native Device Message Details
4-323
4
Native Device Message Details
SWE:EGAT:VIEW/SWE:EGAT:VIEW?
Gate View
Function
This command sets whether to display the gate view.
Command
SWE:EGAT:VIEW switch_com
Query
SWE:EGAT:VIEW?
Response
switch_res
Parameter
switch_com
Displays or hides Gate View.
OFF|0
Hides Gate View.
ON|1
Displays Gate View.
switch_res
Displays or hides Gate View.
0
Hides Gate View.
1
Displays Gate View.
Details
This command is not available during time domain measurement. This
command is not available when Gate Sweep is set to Off.
This command is not available when the N dB Bandwidth measurement
function is On.
This command is not available when the Math function is other than Off.
Example of Use
To display Gate View.
SWE:EGAT:VIEW ON
SWE:EGAT:VIEW?
> 1