Anritsu MS2840A - SEM:SWE:TIME:AUTO:MODE;SEM:SWE:TIME:AUTO:MODE?

Chapter
４
Native Device Message Details
4-260
SEM:SWE:TIME:AUTO:MODE/SEM:SWE:TIME:AUTO:MODE?
Spectrum Emission Mask Auto Sweep Time Select
Function
This command sets the Normal/Fast mode in the case that the sweep
time in measuring the reference power for Spectrum Emission Mask
measurement is Auto.
Command
SEM:SWE:TIME:AUTO:MODE mode
Query
SEM:SWE:TIME:AUTO:MODE?
Response
mode
Parameter
mode
Normal/Fast of sweep time
NORM
Normal sweep time
FAST
High-speed sweep mode
Example of Use
To set the sweep mode in the case that the sweep time in measuring the
reference power is Auto to FAST.
SEM:SWE:TIME:AUTO:MODE FAST
SEM:SWE:TIME:AUTO:MODE?
> FAST