Anritsu MS2840A - :CALCulate:TOI:FREQuency:BASE[:LOWer[:UPPer]]:AUTO?; [:SENSe]:TOI:ZSPan[:STATe] ON|OFF|1|0

Chapter 2 SCPI Device Message Detail
2-832
Example of Use
To query whether the automatic setting of the tone frequency for the TOI
measurement is on or off.
TOI:FREQ:BASE:AUTO?
> 1
Related Command
This command has the same function as the following command.
:CALCulate:TOI:FREQuency:BASE[:LOWer[:UPPer]]:AUTO?
:CALCulate:TOI:FREQuency:BASE[:LOWer[:UPPer]]:AUTO?
TOI Tone Frequency Auto/Manual Query
Function
This command queries whether the automatic setting of the tone
frequency for the TOI measurement is on or off.
Refer to
[:SENSe]:TOI:FREQuency:BASE[:LOWer[:UPPer]]:AUTO?
Related Command
This command has the same function as the following command.
[:SENSe]:TOI:FREQuency:BASE[:LOWer[:UPPer]]:AUTO?
[:SENSe]:TOI:ZSPan[:STATe] ON|OFF|1|0
TOI Zero Span Measurement On/Off
Function
This command turns on and off the Zero Span Measurement in the TOI
measurement.
Command
[:SENSe]:TOI:ZSPan[:STATe] <switch>
Parameter
<switch>
Setting of the Zero Span Measurement in the
TOI measurement
ON|1
Turns on the Zero Span Measurement.
OFF|0
Turns off the Zero Span Measurement. (Default)
Example of Use
To turn on the Zero Span Measurement.
TOI:ZSP ON