Anritsu MS2840A - :DISPlay:WINDow[1]:TRACe:Y[:SCALe]:RLEVel:OFFSet <rel_ampl>; :DISPlay:WINDow[1]:TRACe:Y[:SCALe]:RLEVel:OFFSet?

2.2 Level
2-71
2
SCPI Device Message Details
:DISPlay:WINDow[1]:TRACe:Y[:SCALe]:RLEVel:OFFSet <rel_ampl>
Ref.Level Offset Value
Function
This command sets the offset value of the reference level offset function.
Command
:DISPlay:WINDow[1]:TRACe:Y[:SCALe]:RLEVel:OFFSet
<rel_ampl>
Parameter
<rel_ampl>
Reference level offset value
Range –100.00 to +100.00 dB
Resolution 0.01 dB
Suffix code DB
dB is used even when omitted.
Default value 0 dB
Example of Use
To set the reference level offset function to ON at +10 dB.
DISP:WIND:TRAC:Y:RLEV:OFFS 10
:DISPlay:WINDow[1]:TRACe:Y[:SCALe]:RLEVel:OFFSet?
Ref.Level Offset Value Query
Function
This command queries the offset value of the reference level offset
function.
Query
:DISPlay:WINDow[1]:TRACe:Y[:SCALe]:RLEVel:OFFSet?
Response
<rel_ampl>
Parameter
<rel_ampl>
Reference level offset value
Range –100.00 to +100.00 dB
Resolution 0.01 dB
Suffix code DB
dB is used even when omitted.