Anritsu MS2840A - :CALCulate:TOI:FREQuency:BASE:UPPer <freq>; [:SENSe]:TOI:FREQuency:BASE:UPPer?

2.15 Setting the TOI Measurement Functions
2-829
2
SCPI Device Message Details
Related Command
This command has the same function as the following command.
:CALCulate:TOI:FREQuency:BASE:UPPer <freq>
:CALCulate:TOI:FREQuency:BASE:UPPer <freq>
TOI Upper Tone Frequency
Function
This command sets the upper tone frequency for the TOI measurement.
Refer to
[:SENSe]:TOI:FREQuency:BASE:UPPer <freq>
.
Related Command
This command has the same function as the following command.
[:SENSe]:TOI:FREQuency:BASE:UPPer <freq>
[:SENSe]:TOI:FREQuency:BASE:UPPer?
TOI Upper Tone Frequency Query
Function
This command queries the upper tone frequency for the TOI
measurement.
Query
[:SENSe]:TOI:FREQuency:BASE:UPPer?
Response
<freq>
Parameter
<freq>
Upper tone frequency for the TOI measurement
Range
[MS269xA]
–100 MHz to 6.05 GHz (MS2690A)
–100 MHz to 13.6 GHz (MS2691A)
–100 MHz to 26.6 GHz (MS2692A)
[MS2830A]
–100 MHz to 3.7 GHz (Option 040)
–100 MHz to 6.1 GHz (Option 041)
–100 MHz to 13.6 GHz (Option 043)
–100 MHz to 26.6 GHz (Option 044)
–100 MHz to 43.1 GHz (Option 045)
[MS2840A]
–100 MHz to 3.7 GHz (Option 040)
–100 MHz to 6.1 GHz (Option 041)
–100 MHz to 26.6 GHz (Option 044)
–100 MHz to 44.6 GHz (Option 046)
Resolution 1 Hz
Suffix code None. Value is returned in Hz units.