Anritsu MS2840A - :DISPlay:SPURious:VIEW[1]:WINDow[1]:TRACe:Y[:SCALe]:RLEVel <real_1>,<real_2>,<real_3>,<real_4>,<real_5>,<real_6>,<real_7>,<real_8>,<real_9>,<real_10>,<real_11>,<real_12>,<real_13>,<real_14>,<real_15>,<real_16>,<real_17>,<real_18>,<real_19>,<real_20>

Chapter 2 SCPI Device Message Detail
2-742
:DISPlay:SPURious:VIEW[1]:WINDow[1]:TRACe:Y[:SCALe]:RLEVel
<real_1>,<real_2>,<real_3>,<real_4>,<real_5>,<real_6>,<real_7>,<real_8>,<
real_9>,<real_10>,<real_11>,<real_12>,<real_13>,<real_14>,<real_15>,<rea
l_16>,<real_17>,<real_18>,<real_19>,<real_20>
Spurious Emission Reference Level
Function
This command sets the reference level of each segment.
Command
:DISPlay:SPURious:VIEW[1]:WINDow[1]:TRACe:Y[:SCALe]:RLEV
el <real_n>
Parameter
<real_n>
Reference level of Segment n
Range Value equivalent to –120 to +50 dBm
Resolution 0.01 dB
Suffix Code DBM,DM
dBm is used when omitted.
Default 0 dBm
Example of Use
To set the reference level of each segment.
DISP:SPUR:VIEW:WIND:TRAC:Y:RLEV
0DBM,0,0,3,0,0,0,8,0,0,0,0,0,0,0,0,0,0,0,0