Anritsu MS2840A - [:SENSe]:SWEep:EGATe:LENGth <time>; [:SENSe]:SWEep:EGATe:LENGth?

Chapter 2 SCPI Device Message Details
2-300
[:SENSe]:SWEep:EGATe:LENGth <time>
Gate Length
Function
This command sets the time length of the gate.
Command
[:SENSe]:SWEep:EGATe:LENGth <time>
Parameter
<time>
Time length of the gate
Range 50 µs to 1 s
Resolution 20 ns
Suffix code NS, US, MS, S
S is used when omitted.
Example of Use
To set the gate time length to 20 ms.
SWE:EGAT:LENG 20MS
[:SENSe]:SWEep:EGATe:LENGth?
Gate Length Query
Function
This command queries the time length of the gate.
Query
[:SENSe]:SWEep:EGATe:LENGth?
Response
<time>
Parameter
<time>
Time length of the gate
Range 50 µs to 1 s
Resolution 20 ns
Suffix code None. Value is returned in s units.
Example of Use
To query the gate time length.
SWE:EGAT:LENG?
> 0.02000000