2.15 Setting the TOI Measurement Functions
2-827
2
SCPI Device Message Details
Response
<freq>
Parameter
<freq>
Lower tone frequency for the TOI measurement
Range
[MS269xA]
−100 MHz to 6.05 GHz (MS2690A)
−100 MHz to 13.6 GHz (MS2691A)
−100 MHz to 26.6 GHz (MS2692A)
[MS2830A]
−100 MHz to 3.7 GHz (Option 040)
−100 MHz to 6.1 GHz (Option 041)
−100 MHz to 13.6 GHz (Option 043)
−100 MHz to 26.6 GHz (Option 044)
−100 MHz to 43.1 GHz (Option 045)
[MS2840A]
−100 MHz to 3.7 GHz (Option 040)
−100 MHz to 6.1 GHz (Option 041)
−100 MHz to 26.6 GHz (Option 044)
−100 MHz to 44.6 GHz (Option 046)
Resolution 1 Hz
Suffix code None. Value is returned in Hz units.
Example of Use
To query the lower tone frequency.
TOI:FREQ:BASE:LOW?
> 1000000000
Related Command
This command has the same function as the following command.
:CALCulate:TOI:FREQuency:BASE:LOWer?
:CALCulate:TOI:FREQuency:BASE:LOWer?
TOI Lower Tone Frequency Query
Function
This command queries the lower tone frequency for the TOI
measurement.
Refer to
[:SENSe]:TOI:FREQuency:BASE:LOWer <freq>.
Related Command
This command has the same function as the following command.
[:SENSe]:TOI:FREQuency:BASE:LOWer?
To Next Page
Loading...
