3.11 Batch Measure Function Settings
Native Device Message List
3
Native Device Message List
3
Table 3.11-1 Batch Measure Function Settings (Cont’d)
Function Command
Query
Response
Remarks
Transmit Intermodulation Batch
Measure
---
MEAS:BATC:IM?
filename,spa_freq,[sg_fr
eq[,device]]
Refer to Chapter 4,
“Native Device Message
Details”.
spa_freq :
Center frequency
of
Spectrum Analyzer
sg_freq : Signal Generator
frequency
filename:
parameter list file
name
device :
drive name
= D | E | F ...
Measure Power Adjust
---
:MEAS:POW?
rbw,length,sg_start_leve
l,sg_max_level,target,ra
nge
[,frequency[,tracepoint[,cou
nt[,adjust_log[,sg_offset_switch
]]]]]
Refer to Chapter 4,
“Native Device Message
Details”
---
To Next Page
Loading...
