Anritsu MS2840A - Page 282

Chapter 2 SCPI Device Message Details
2-272
[MS2830A], [MS2840A]
EXTernal[1]
External input (External)
IMMediate
Free run
WIF|RFBurst
Wide bandwidth IF detection (Wide IF Video)
VIDeo
Video detection (Video)
SG
SG Marker
FRAMe
Frame period trigger
Details
[MS269xA]
SG marker trigger can be selected only when the Option 020/120 Vector
Signal Generator is installed.
BBIF trigger cannot be selected only when the Option 040/140 Baseband
Interface Unit is not installed or the software package is Ver.6.00.00 or
later.
[
MS2830A], [MS2840A]
SG marker trigger can be selected only when the Option 020/120/021/121
Vector Signal Generator is installed.
Example of Use
To set the trigger signal source to video trigger.
TRIG:SOUR VID
Related command
This command has the same function as the following commands.
:TRIGger:ACPower[:SEQuence]:SOURce
:TRIGger:CHPower[:SEQuence]:SOURce
:TRIGger:OBWidth[:SEQuence]:SOURce
:TRIGger:SEMask[:SEQuence]:SOURce
:TRIGger:BPOWer|:TXPower[:SEQuence]:SOURce