Anritsu MS2840A - Page 1051

3.10 Measure Function Settings
3-25
Native Device Message List
3
Native Device Message List
3
Table 3.10.2-1 Adjacent channel power measurement function setting messages (Cont’d)
Function Command Query Response Remarks
ACP Offset Frequency 1
ADJCHSP freq
ADJCHSP? freq
freq
: Offset frequency
offset
: Measurement channel
= 1 | 2 | 3
ADJCHSP offset,freq
ACP Offset Frequency 2
ADJCHSPF freq
ADJCHSPF?
freq
ACP Offset Frequency 3
ADJCHSPFF freq ADJCHSPFF? freq
ACP Filter Type
ADJFILTERTYPE filter
ADJFILTERTYPE?
filter,filter
filter
: Filter type
=
RECT | NYQUIST | ROOTNYQUIST
target:
Target filter
= INBAND | OFFSET
ADJFILTERTYPE
filter,target
ADJFILTERTYPE? target
filter
ACP Power Result Type
ADJPWRTYPE mode ADJPWRTYPE? mode
mode:
Power result type
= CARRIER | OFFSET
ACP Rolloff Ratio
ADJROF ratio
ADJROF?
ratio,ratio
ratio
: Filter rolloff ratio
target
: Target filter
=
INBAND
|
OFFSET
ADJROF ratio,target ADJROF? target ratio