Anritsu MS2840A - Page 1200

Chapter
４
Native Device Message Details
4-118
When Standard is set to W-CDMA Downlink (Channel Power
measurement)
pattern
Parameter to be set
DOWNLINK
3GPP W-CDMA Downlink,
Mean Power measurement
MEAN
3GPP W-CDMA Downlink,
Mean Power measurement
RRCFILTER
3GPP W-CDMA Downlink, RRC Filtered Power
measurement
When omitted 3GPP W-CDMA Downlink,
Mean Power measurement
When Standard is set to W-CDMA Downlink (Spectrum Emission Mask
measurement)
pattern
Parameter to be set
43
3GPP W-CDMA Downlink (P ≥ 43 dBm)
39
3GPP W-CDMA Downlink (39 dBm ≤ P < 43
dBm)
31
3GPP W-CDMA Downlink (31 dBm ≤ P < 39
dBm)
31U
3GPP W-CDMA Downlink (P < 31 dBm)
A43
3GPP W-CDMA Downlink (P ≥ 43 dBm
(Additional))
A39
3GPP W-CDMA Downlink (39 dBm ≤ P < 43
dBm (Additional))
A31
3GPP W-CDMA Downlink (31 dBm ≤ P < 39
dBm (Additional))
When omitted 3GPP W-CDMA Downlink (P ≥ 43 dBm)
When Standard is set to Mobile WiMAX(ACP•OBW•Channel Power
measurement)
pattern
Parameter to be set
10M
10 MHz BW (Channel Bandwidth 10 MHz)
5M
5 MHz BW (Channel Bandwidth 5 MHz)
When omitted 10 MHz BW
When Standard is set to Mobile WiMAX (Spectrum Emission Mask
measurement)
pattern
Parameter to be set
10M
10 MHz BW (Channel Bandwidth 10 MHz)
5M
5 MHz BW (Channel Bandwidth 5 MHz)
When omitted 10 MHz BW