Anritsu MS2840A - Page 1217

Chapter
４
Native Device Message Details
4-135
4
Native Device Message Details
GFSK_920M_200K
GFSK 920MHz 200ksps (ARIB STD-T108)
GFSK_50K_G
GFSK 50ksps (IEEE802.15.4g_d7)
GFSK_100K_G
GFSK 100ksps (IEEE802.15.4g_d7)
GFSK_200K_G
GFSK 200ksps (IEEE802.15.4g_d7)
When omitted BPSK 950MHz (ARIB STD-T96)
When Standard is set to LR-WPANs (IEEE802.15.4)
(Spectrum Emission Mask Measurement)
pattern
Parameter to set
OQPSK_2450M
O-QPSK 2450MHz (IEEE802.15.4-2011)
BPSK_950M
BPSK 950MHz (ARIB STD-T96)
GFSK_950M_50K
GFSK 950MHz 50ksps (ARIB STD-T96)
GFSK_950M_100K
GFSK 950MHz 100ksps (ARIB STD-T96)
GFSK_950M_200K
GFSK 950MHz 200ksps (ARIB STD-T96)
GFSK_920M_50K
GFSK 920MHz 50ksps (ARIB STD-T108)
GFSK_920M_100K
GFSK 920MHz 100ksps (ARIB STD-T108)
GFSK_920M_200K
GFSK 920MHz 200ksps (ARIB STD-T108)
When omitted O-QPSK 2450MHz (IEEE802.15.4-2011)
When Standard is set to APCO P25
(ACP Measurement)
pattern
Parameter to set
EXCEPT_700MHZ-BAND
Except 700MHz-band
700MHz-BW-6_25KHZ
700MHz-BW-6.25kHz
700MHz-BW-25KHZ
700MHz-BW-25kHz
700MHz-BW-100KHZ
700MHz-BW-100kHz
When omitted Except 700MHz Band
When Standard is set to APCO P25
(Spectrum Emission Mask Measurement)
pattern
Parameter to set
FCC_12_5KHZ
FCC 12.5kHz
NTIA_12_5KHZ
NTIA 12.5kHz
When omitted FCC 12.5kHz
When Standard is set to Microlink ETSI
(Spectrum Emission Mask Measurement)
pattern
Parameter to set
7M2
CS:7MHz Class:2
7M4L3-17G
CS:7MHz Class:4L
Frequency Band:3G-17GHz
7M4L17-30G
CS:7MHz Class:4L
Frequency Band:17G-30GHz
7M4LABV30G
CS:7MHz Class:4L